Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'll try to explain my problem. Sorry for my level in english.We've got a LNS router (cisco c7301) which is responsible for the interconnection of 2.400 routers DSL (1.800 adsl routers + 480 sdsl routers).This LNS router is called by several LAC e...
Hi,I want to get statistics about how often I am under attacks and the nature of the attacks.I read many documents about how to activate threat-detection in ASA v8. For this, I need to type the following command: threat-detection basic-threat. Unfort...
Hi,I would like to know why the pri-group command is not available under the controller xx submenu of my 2600XM router. It is running the following IOS c2600-advipservicesk9-mz.123-26.bin and have a VWIC-1MFT-G703 card.Thanks a lot for your help.
Hello, i've got 3750 that have always high cpu (more than 60%). i 've upgrade it (i've twho 3750 in hsrp backup), without resolve problem cpu. the show process doesn't say me what process uses more cpu (some processes have only 1 or 2 % utilisation, ...
Thanks for your reply. Unfortunately I already saw this documentation.As I said these commands should be available but for any reason, I don't know why they don't appear.Here you can see that I have only the threat-detection statistics command availa...
Thanks for your response.i've seen this page before, but haven't find one solution for my problem. In fact, the cpu loads is incrused continously step by step during one or two hours from 20 % to 60 or 80%.We have no ACL on this router.We have find o...
