Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our ASA box will be used by our executives to access internal data using the SSL-VPN clientless access. This means they will see the login and portal pages generated by the ASA box based on their profile. The current fill-in-the-box option of confi...
Is the Dialer-List filter and the load-threshold tied toether? Can a 2nd line be brought up by traffic exceeding the load-threshold which is not "interesting" traffic as defined by the dialer-list? If line one comes up, can line two come up because...
I have 2610XM's with 12.3(6c)code. Trying to track down some strange usage using IP accounting. Going out from this router serial port I see packets addressed to 134.238.255.255 from IP's in the 134.238.x.x range that are different than the local LAN...
We have a 3015 concentrator which is being upgraded to a 3030. We have one T1 line from our ISP supplying bandwidth. We want to add more bandwidth but keep the cost reasonable. Our ISP (and another we used for another connection) can supply a 3meg ...
We worked with Cisco and Berbee to get this done. There are limitations especially with the login box. They talked with the Cisco product managers who liked what we were trying to do and were going to try and make changes to future IOS version to a...
Thanks for the response but unfortunately your comments is just about all the documentation there is about customizing the screens. We are trying to find examples and details about what can be done. Can we move the login box to the upper right corne...
Is there any good way of doing that in the router using an access-list or debug ip packet? I know you would not get the whole thing like a sniffer but maybe the port number?
Per the bug listing above the instructions are:The workaround is as follows: 1. From the Polling and Thresholds Console, in the polling group,go to Interface Groups and select the Backup Interface group. 2. Change the TYPE=*ISDN* Matching Criteria to...
