Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I'm building a multicast network and one of the question I have is if I should configure PIM interfaces in sparse-dense mode or simply sparse-mode. FYI, i'm planning to use PIMv2 and BSR to elect RP.With PIMV2/BSR, why do I need to setup ...
Hi everyone,We are implementing CB-QoS in our network based on L3 switches 3750 & 3560. We are planning to take advantage of the Shaped Round Robin functionnalities of those equipement. Traffics will be identified at the edge & marked with DSCP codes...
Hi,We are using 3750 switches in our core & distribution layer in many sites. WAN links are at a variety of speed (2 M, 5M, 10M up to dark fiber running at 1G)through our MAN provider network. I'm actually designing the QoS strategy and implementatio...
Hi,We are using 3750 switches in our core & distribution layer in many sites. WAN links are at a variety of speed (2 M, 5M, 10M up to dark fiber running at 1G)through our MAN provider network. I'm actually designing the QoS strategy and implementatio...
I'm trying to do a simple scenario: accessing a server at the inside. I'm using the usual trio lines (static, acl, acg) as follow:G= Global IP address (outside if)F= Foreign IP address (origine of test)access-list in_outside_static extended permit ip...
It's normal.IGMP not understanding MAC multicast: Indeed, IGMP is an IP based protocol, see http://tools.ietf.org/html/rfc3376.I suspect MS NLB IGMP waits to receive packets on 239.255.82.160 for multicast use, in addition to 10.102.82.160 for unica...
In the ASA, as described in the documentation, you should create ACL to permit multicast traffic coming in:From the 8.0 Config guide:Step 1- Create an access list for the multicast traffic. You can create more than one entry for a single access list...
I have the same question than the original poster, but: Is QoS available on Etherchannel for 3560 & 3750 switches? I mean :1- service-policy to identify & mark incoming traffics 2- Scheduling, prioritizing, rate limits, etc for outgoing traffics with...
