About justserve

justserve · 05-28-2014

Hello All,I have Cisco IP Phone 8831 conference phones that are not registering to CUCM. The version of the CUCM is 9.1.2.10000-28. I have downloaded and installed the devicepack for the version of CUCM in this link: http://www.cisco.com/c/en/us/td/d...

justserve · 01-09-2013

Hi,I have a CUCM cluster with 3 servers - 1 Publisher (PUB) and 2 Subscribers (SUB1 and SUB2).SCENARIO:CUCM Configuration (in the order of priority): SUB1, SUB2, PUBThe phones are registered to SUB1 as the Active (Unified CM 1) but none of the other ...

justserve · 09-06-2012

Hello All,The eth0 on one of my MCS 7835 has failed. The server is a subscriber and has lost connectivity to the publisher. How can I resolve or bring up the eth1.Thank you for your response.

justserve · 04-30-2012

Hello All,I have this issue with calls between Avaya Phones and Cisco Phones on my network.When a call is made between the two types of Phone, the caller ID and Name of the Avaya Phone are displayed on the Cisco Phone during the conversation. But whe...

justserve · 03-21-2012

Hello All,I just want to ask something. I do not know if any of this is possible:Let's assuming there are two IP Phones A and B. If Phone A calls Phone B1. Is it possible to customise the ringback tone that caller A hears while Phone B is ringing? If...

justserve · 05-28-2014

I was able to add the phone even prior to installing the device pack. I did not reboot the cluster but restarted TFTP services on all the servers in the cluster.

justserve · 01-11-2013

Hi Aaron,With or without adding the domain name, the issue was resolved. In System/Servers in CUCM, I changed the server references from hostnames to the IP addresses of the servers, and reset the phones.However, why is it that the issue persisted w...

justserve · 01-10-2013

Hi Aaron,Where do I execute the command tftp get sepxxxxx.cnf.xml?When I included the domain names, PUB (Unified CM 3) became the standby on the phone with its hostname and actual IP address displayed whereas SUB 2 (Unified CM 2) ip address was no...

justserve · 01-09-2013

Hi,Find below the responses:IP address displayed for SUB1 while for the PUB and SUB2 hostnames are displayedDomain names are not assigned to the phones. The phones are registered to TFTP server assigned via option150. Although, the sub they are regis...

justserve · 01-09-2013

I have checked again and all the three servers are in the CM Group. The phones are SCCP and the CUCM version is 7.1.5 (7.1.5.32900-2).In addition, in the Unified CM Configuration on the phone, if I select Unified CM 2 and Unified CM 3, I can see the...

Member Since	‎02-23-2010 07:56 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	87
Total Helpful Votes Received	5

User Statistics

User Activity

Cisco IP Phone 8831 Not Registered

Standby CUCM and Phone Registration

eth0 down on MCS Server

Display of Caller ID from Avaya Phone

Customised Ringing and Ringback Tone

I was able to add the phone

Re: Standby CUCM and Phone Registration

Re: Standby CUCM and Phone Registration

Re: Standby CUCM and Phone Registration

Re: Standby CUCM and Phone Registration