Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello guys,When configuring a CRS router I found that the MSC-40/FP-40 linecards have two modes of BW operation(20/40Gbps), and you need a license to operate at 40GbpsMSCs and CRS-FP40s can operate at 40-Gbps throughput when a license is enabled. You...
Hello all,I am having an issue while trying to create a VLAN/SVI interface on my 6500 Metro Ethernet Aggregator.I am receiving an error message that I cannot create an SVI without having the vlan added on the L2 vlan database, but the issue is that t...
Hello all,I am having an issue while trying to create a VLAN/SVI interface on my 6500 Metro Ethernet Aggregator. I am receiving an error message that I cannot create an SVI without having the vlan added on the L2 vlan database, but the issue is that ...
Hello all,For RFP purposes we are asked to comply with an access router that supports 2000 VRFs ... we were trying to do it with 7600 but is documented that it only supports 1024 VRFs, so next option would be the GSR12K but I couldnt find any documen...
Hello,I am developing an ISG/Broadhop SME solution to offer some differentiated services for broadband customers.The ISG/SME integration is working ok: As soon as the subscribers connect to the network they are redirected to the SME portal (PLAN port...
Hello,This issue has been resolved, the issue here was a corrupted database, I needed to reload the box and after that everything works fine.Regards!Alex
Here is the response from TAC, we will try this later this week, I'll let you know the result.---------We really have 2 choices here. And we have to be careful because wemight lose the vlan database. It has been locked since April.We should try to fo...
This a production environment. it is running VTP server mode.I also tried to delete the vlan and recreated but it does not work either.Here is the VTP status output:CAT_6k_MT>enPassword: CAT_6k_MT#sh vtp staCAT_6k_MT#sh vtp status VTP Version ...
Thanks to all for your responses!I tried to create a new VLAN and do not name it to avoid a duplicate name, but the behavior is the same. See below: CAT_6k_MT(config)#vlan 23CAT_6k_MT(config-vlan)#exit% Applying VLAN changes may take few min...
Yes, the vlan exists in the vlan database (status active), here it is:CAT_6k_MT#sh vlan id 1241VLAN Name Status Ports---- -------------------------------- --------- -------------------------------1241 VLAN1241 active Po11, Po61VLAN Type SAID MTU Pare...
