Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to backup/store the SNMPv3 user name settings (passwords and keys) along with the normal running config. Since the snmp user info is not present in the running config, how is one supposed to preserve this information?I would like to be able ...
I have a 4900m and i am using the X2 twin gig converter modules. Currently i use matching 1Gb ethernet SFP modules in each twin gig module. i.e. I use either both 1 gig fiber or both 1 gig copper for ethernet. I read through documentation and i...
I have a 4900m with IOS 12.2(53) SG2.Over the past 6 months, there have been about 5 instances where the switch has rebooted itself. Most of them occuring within the last few weeks. So it seems to be getting worse. dumping the log data showed this ...
I have a 3560 switch running: version 12.2(55)SE3 image: c3560e-universalk9-mz.122-55.SE3.I can ssh into the switch from a remote pc just fine using usernames and passwords.I want to use keys so that the ssh does not prompt me for login info.under my...
The IOS stores the usernames and password hashes in config file, so i dont understand how showing the snmpv3 password hashes and usernames would be any less secure than current situation. Managing this going to be a real pain for automation if tha...
So what is the workaround for this?I tried setting the max devices to zero but i get the same message when i do a global no ip device tracking. i.e.% IP device tracking is disabled at the interface level by removing the relevant configsDoes setthin...
So i ended up replacing the 4900m unit that had crashed at least 3 times with one from the lab that never reported this issue. And now this new one also crashed in the same manner doing a self reboot. Now i find it hard to beleive it is a hardware...
I have a report from a second crash. similar to the previous dump with a few exceptions;Machine Check Interrupt Count: 1c9910bL1 Instruction Cache Parity Errors: 0L1 Instruction Cache Parity Errors (CPU30): 0L1 Data Cache Parity Errors: 1c9910bJawa ...
