About tcrane8080

tcrane8080 · 10-14-2015

i have a monitor SW on a 3750 SW and i need to monitor a port on another 3750 SW.is this possible? Thanks

tcrane8080 · 10-13-2015

i just installed a 3850 and my local site is not able to see any networks passed the 3850.i believe EIGRP STUB CONNECTED SUMMARY command is causing this. any thoughts?Thanks!

tcrane8080 · 04-17-2014

i installed ASDM from my ASA5505 and the app launches but when i input the IP address, username and PW it says its "unable to launch device manager from 10.30.13.18"What am i doing wrong?Thoughts?Thanks!

tcrane8080 · 11-09-2011

i have a user that her IPad is constantly getting kicked off the wireless. If it matters, her IPad is running OS5.I'm getting the following from my AP controller:the part in red is confusing me.Nov 08 18:05:45.586 apf_policy.c:542 APF-1-DISCONECT_MO...

tcrane8080 · 09-28-2011

we are looking at having a 172.168.40.0 network on our LAN. BUT i want to tie it down to JUST accessing the internet!So i'm looking for some ideas on how that ACL would look like.i have an ASA 5510 as our firewall and i've attached a simple network d...

tcrane8080 · 10-15-2015

here's what i config-ed:Source SW:KWCHSW27#sh monSession 1---------Type : Remote Source SessionSource Ports : Both : Gi0/51Dest RSPAN VLAN : 900 Destination SW:KWCHSW32#sh monitorSession 1---------T...

tcrane8080 · 10-15-2015

i think you got me on the right path!a quick question, though.so, i need to create a vlan just for the RSPAN, that's cool, no biggy.But, do the source ports NEED to be in that vlan or can they be in trunking mode?the port that i want to monitor is ou...

tcrane8080 · 10-14-2015

Jon, sorry for the delay!!what i found was the new 3850's come from the factory with a "universal" IOS andwhat determines which services are these lines when you do sh ver:License Level: IpservicesLicense Type: PermanentNext reload license Level: Ips...

tcrane8080 · 10-13-2015

HaysRTR#sh ip eigrp neiEIGRP-IPv4 Neighbors for AS(100)H Address Interface Hold Uptime SRTT RTO Q Seq (sec) (ms) Cnt Num2 10.30.13.9 G...

tcrane8080 · 10-13-2015

i have a 1841 connected to the SW for the backup link. Since the SW doesn't have a serial port i have the RTR connecting to a cradlepoint. which, when the main connection, 10.30.13.9 goes down the traffic goes out the RTR and thru the cradlepoint

Member Since	‎07-29-2009 02:11 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	26

User Statistics

User Activity

monitoring a port on another switch

local subnet not able to see remote networks passed 3850

asdm

IPad getting kicked off wireless network

ACL config guidance

here's what i config-ed

i think you got me on the

Jon, sorry for the delay!

HaysRTR#sh ip eigrp neiEIGRP

i have a 1841 connected to