Hello, current we are using 1815w for OEAP and we plan to use 1815t in the future.The deployment guides for both types of APs says: LAN3 is a dedicated local port on OEAP1810/1815 But it's possible to configure a remote lan to LAN3 over the GUI of th...

Hello,   since ASDM 7.92 and higher I'm facing the same problem: all ACL descriptions lines (ACE remarks) are show together in one line and for all entries in the ACL (ASDM - Configuration - Firewall - Advanced - Standard ACL). I've tested it with 7....

Hello, today I tried to import a new building and new floor maps into our Prime Infrastructure 2.2.2 just as I was used to but I failed. First everything went fine when I import a new floor area but when I pressed OK at the end the new floor map didn...

Hello, I tried to install new SHA2 3th-Party certificates on our WLCs. There are old WiSM1-Boards and 2504 to support our old 1230 Access Points, running 7.0.251.2, which didn't install it, although the config manual for 7.6 and 8.0 say that SHA2 cer...

Hi,we want to upgrade our 6500 with a SUP 2T and software 15.1(2)SY3. In our chassis there is a WiSM-1 Controller (7.0.250.0) supporting our 1230 APs and a WiSM-2 (7.4.121.0). According to the Release Notes for 15.1(2)SY the WiSM-1 should be compatib...