Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,
I configured a HP Procurve 5406Rzl2 switch chassis so some users can be migrated from an existing Cisco switch (managed by 3rd party) to the new HP one. We have two phones connected, both 7945Gs, one V4 and the other V16. After running ...
Hi,I have an issue with a customer when they call forward all to a mobile phone. Being in Australia, when they hit CFwdAll and dial 004xxxxxxxx (leading 0) and you call their extension, you don't receive a ringing tone on the calling phone and when y...
Hi everyone,I've only just started receiving these QM Notifications this morningQM2002Message: The phone with MAC address jsmith-8350 on 10.150.1.249 (SFAP10AQM.local) is not associated with the JTAPI user.Action: Associate the phone with the QM JTAP...
Hi everyone,I've been digging around the forum and haven't found a solution to my issue.I configured an old 1711 router for a home office setup while waiting for Skydrive. They have a fairly old cable modem only capable of forwarding tcp/1723 for PPT...
Hi everyone,I has a 2651XM router on my desk today I received a VIC 2FXO-M3 card to build a home phone system, but cannot for the life of me see the card when I run a show inv.Router#show invNAME: "2651XM chassis", DESCR: "2651XM chassis"PID: C2651XM...
We've found differing results with the hardware version of 7945 phones.
Of the V4, V8 and V16s -
V4 - initial success after factory reset with registration and call capability. Once rebooted, fails with "registering"
V8 - initial success after fact...
Hi Philip,
Thanks for the quick response, this is the response when entering show lldp info remote A7 (phone not registering)
As far as I can tell the phone has been told what VLAN is voice.
# show lldp info remote a7
LLDP Remote Device Information...
Hi Jonathon,
I know I posted this 2 years ago but I was able to finally fix the issue. Turned out that one leg of the call between CUBE and Call Manager (inbound) was H323 but the other 3 (when call forwarding to mobile) was SIP. Once I fixed the di...
