Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to forward both TCP and UDP ports 3074 but it looks like I can only have either TCP/3074 or UDP/3074 open one at a time. When I try to enter the UDP/3074 NAT statement, I get "ERROR: NAT unable to reserve ports" What can I do to get ar...
I am trying to setup a policy route at a remote site that routes to a different router over BGP/MPLS. We need to move this network traffic for testing reasons. Instead of the 10.1.1.0 network going to 1.1.1.10 to get to 10.5.5.0 (another remote sit...
Has anyone got this to work in an 8.6 environment? It seems to work sometimes and then it stops. The only way I can get it to start working again is by rebooting the router. The client is running 8.6 with the 2900 series routers (latest IOS 15.2.T...
Client is upgrading from 8.0.3 on MCS to 8.5 on UCS. I know that I must disable EM when upgrading but does the DRS backup retain their current logged in phone or will they have to login again?Thanks!
CUCM 7 does not support caller ID running MGCP. The only time it began support caller ID over MGCP is 8.6 which it didnt work for me to well. Inconsistent. For the issue that I ran into, I just moved them to H.323 and left it. I use H.323 for all...
Thanks for the reply. I tried clear xlate and that did not work. Since you weren't having the same problem, I blew away everything on the config and started over. It's working now. Thanks.
Hey John and Richard,Thanks for comments and yes...I have two typos in my config. 1. The name is wrong on my route-map2. My route should be --> B 10.2.2.0 255.255.255.0 [20/0] via 2.2.2.1, 00:00:01Should'nt the config work like shown above or...
