Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
Can u please help on these.
00:01:32: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.00:01:35: %OIR-SP-6-PWRFAILURE: Module 1 is being disabled due to power convertor failure. PMB r...
Hi Leo,
Thanks for the update.
Please note that module 3 got disabled only after i insert the IDS .
00:17:48: %OIR-SP-6-PWRFAILURE: Module 2 is being disabled due to power convertor failure. PMB registers are dumped as follows, R0= 0x2, R1= 0x2, R...
Hi Leo,
Thanks for the quick response.
Kindly confirm two things
1. Have you checked the log i have attached ?
2.Is there is any clear evidence we can point out before going out for a chasis replacement.
Hi Leo,
Problem is IDS is getting rebooting continuously. Observed same when inserted to other slots too. Same type card is working in other slot.
Here is more details.
Router#[Ash modMod Ports Card Type Model Serial No.--- ----- -------------------...
