Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We have migrate on asa 5520 and i have connections problems with the message:%ASA-3-201011: Connection limit exceeded 100/100 for outbound packet from 10.9.1.1/55194 to 10.1.6.1/22 on interface insideI Change the static lines to 1000 max tcp conne...
Hi,i have a router with nat overload configurated on the outiside interface. But after a few time, connectivity to outside is lost but can be reactivated with clear ip nat translation *.I have the following in show ip nat translation before the clear...
Hello,I'm configuring a pix in order to have a vpn access with extended authentification (RADIUS).The vpn acces is ok for the inside LAN.Now i would like to restriced access with access-list send by the RADIUS.The RADIUS is configured with cisco-avpa...
Hello,I have an interconnexion of some 2621 routers connected to a 7200 router on a contrale site via an ip network.On each 2621 a DTE x25 is connected and i would like to route all the x25 traffic to the 7200 with xot. And then manage all the other ...
Hello,I have a connection limit exceeded on a DMZ with a pix 520 with a message like:%PIX-3-201009: TCP connection limit of 100 for host 172.22.4.5 on DMZ exceededI dont know what is the right parameter to change ?I have change the nat to unlimited a...
I make a lots of modifications, but i think i have found why the calls was cleared:It is not possible to forward to a xot route a conection coming from a xot route (the call is cleared).It that right?
