About toolshed1

toolshed1 · 02-21-2024

i currently have port-channel with 2 interfaces as members. I would like to dissolve that so interfaces will become individual trunksWould it be enough for me to go under po1 and do "no vpc 1 ", or would i need to go under gi1/1/1 and gi2/1/1 and do ...

toolshed1 · 12-14-2023

Hi,I have L3 terminating on the core. It's in use by client devices. I need to modify that from /16 to /21Will i incur any downtime to clients when modifying that?From:interface vl 10 ip addr 10.10.0.0 255.255.0.0To:interface vl 10 ip addr 10...

toolshed1 · 12-13-2023

Hi,If i need to add additional allowed vlans on trunk would i run command first on PortChannel interface or 2 physical interfaces?Thanks.

toolshed1 · 08-19-2023

Hi All,I have 2 4506-E running in VSS config. They been up for multiple years without any issues. Out of nowhere one of the enclosures stopped processing IPs for devices that are plugged in into line card. I can list MAC addresses and i see number of...

toolshed1 · 09-23-2021

Hello,I have somewhat unique situation.Everything is L2My ISP is handing off their up link to me through 10 GB SFP (traffic rated for 2 GB).As my ASR is not licensed to do 10GB i was forced to place 3850 in between.I have ISP 10GB going to 3850 10GB ...

toolshed1 · 02-22-2024

Thank you.Should i still do "no vpc 1 " on po1 interface after shutting it down and prior to defaulting physical interfaces?

toolshed1 · 12-14-2023

clients are getting proper subnet from DHCP. Just SVI on the core was originally set to /16 a long long time ago.

toolshed1 · 12-14-2023

Currently DHCP is advertising 255.255.248.0 and gateway 10.10.0.1 so thats the config that clients currently get. So really nothing is changing from that standpoint. I just need to reflect that on SVI on the core

toolshed1 · 12-14-2023

Current /16 vlan only has 1400 clients and it is DHCP. I have to use 10.10.x.x IP addressing on future new vlan that will be /26.

toolshed1 · 12-13-2023

Kasun,Thanks for quick response. Just to confirm i already have existing PortChannel with allowed vlans and 2 Physical interfaces that are part of that PortChannel with same allowed vlans. I need to create additional vlans and add them to PortChannel...

Member Since	‎02-20-2014 02:10 PM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	39
Total Helpful Votes Received	20

User Statistics

User Activity

removing vpc

modifying subnet

PortChannel and interfaces

Cant ping IPs on one of the enclosure

Traffic shaping

Re: removing vpc

Re: modifying subnet

Re: modifying subnet

Re: modifying subnet

Re: PortChannel and interfaces