Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm having a heck of a time integrating my 1200 series AP with my wireless HWIC AP installed in my 3845 router. I've tried to set up my 1200 AP as a repeater, bridge, and standalone AP with no luck. I'm starting to think this integration isn't supp...
I have 2 6509's with SupII's installed that have a GigE trunk link between them. We noticed ISCSI traffic taxing the CPU on the SUP when ISCSI traffic was traversing the Gig link. We are upgrading to Sup 720's soon and I'm hoping this situation sho...
Good Morning NetPro Community,I'm new to configuring the 5510/5505 for VPN. I have the VPN nailed up between the 5505 and 5510, but I can't get the 5510 to hand out IP's to the 5505. Any ideas what I'm missing? My config for the 5505 is below. I ...
Hey There Folks,I have a 3845 router with an AP HWIC installed. The module doesn't seem to transmit any signal. I'm not picking up a thing. Below is what I have configured. I made it real basic; nothing fancy like my 1200 series AP's have on them...
Hey Surendra,Yes, I did enable the station role for each type of config tried. For each setup, I used a known working config but could never get the standalone AP to work in any mode. So, I started thinking the wireless HWIC integration with a 1200...
Good Afternoon William,The main reason I was thinking the switch might give me an error; even though the switch port shows to have flow control capabilities, is trunk links act a bit different. In the past, the switch has spit out an error at me whe...
I'm running CatOS. The port shows to have the capabilities. However, I was concerned it might give me an error when trying to enable flow control since the port is a dot1q trunk. I can't find any info on Cisco's website saying it isn't possible, s...
Good Morning Kevin,Ahhhhh; I see. Wow, I thought NEM was what is needed. I figured it was something simple I was doing wrong. Let me give this a try. Thanks for the response!!Take Care,Erik
