Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Ryan,
Here is a link that goes over setting up the 1010 and installing the VSM on the VSA.
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0_4_s_p_1_1/software/configuration/guide/n1010_vsvcs_cfg/n1010_vsvcs_cfg_1oview.html...
Is there any text that comes up after the screen shot that you provided or completely blank?
I would verify the boot policy and make sure it is pointed to where you have the boot LUN stored.
-David
Hi Ryan,
The VSA (1010) is essentailly a special hypervisor that can host both VMware and Hyper-V VSMs. You will have to create the Hyper-V VSM in the VSA. Once that VSM is created, you should be to integrate that with SCVMM.
Let me know if you have ...
Hello,
You need to verify that the server in AB-01/AB-02 is a part of the multicast group to be abel to receive the traffic. You do NOT need to be a memeber of a group to send traffic to said group.
On AB-01/AB-02, look at the output of "show ip igmp...
Hi Christoph,You can use the 1227 as regular 10G ports. You'll just need to be sure to use the correct driver when loading your OS onto the server.Thanks,David
