Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a 6509 that I've setup with route-maps in order to route VLANs in different ways. For example, if we wanted some vlans to get out to the internet we would route them to a certain address. Then there is another vlan that we route to another int...
Okay so here is my network setup. I have a 1 ASA5505 setup at a remote location. My internet/voice provider has a router at that location also to route traffic over the MPLS for our location to location traffic, and to route traffic to the internet. ...
Okay this happens to be the weirdest thing I've seen. Here is the setup. I have a Pix 515e firewall. I have VPN setup on it so my users can connect remotely from across the country. I have one set of users who can't connect. Let me clarify. The VPN ...
I have a remote site that is currently setup using a PIX 501 which is setup on a cable modem. That PIX connects back to two of my main sites using a VPN tunnel. The two main sites have a ASA5505, and a ASA5510, one has a 10MB fiber connection the or ...
I have Cisco ASA5505 that I'm trying setup VPN access to and I'm having the hardest problem with it. The VPN tunnel connects and the logs show PHASE 1 completed. But whenever I try and make any connection to the internal lan I get nothing. I have tri...
I hope I answer your question correctly, so here we go..My provider gave me a router and a switch.. On their switch I have two ports, inside (gig0/1) and outside gig(0/2) pretty much.So I connect their gig0/1 into my layer two switch, and then connec...
Without even doing any sniffing I see that packets are being bypassed for some reason. Everything appears right. I've reinstalled the VPN client software, redid the connection entry, and still nothing. Again and whats weird is that other VPN clients ...
Had the problem again this morning. It seems as though the ASA's can generate traffic to the PIX, but the PIX refuses to unless I do a clear crypto isakmp sa.Any wonderful clues or help out there??Here is some more info..
Still nothing. This is starting to get frustrating. Its like the packets are entering the PIX but they aren't coming back through. I'm attaching some logs.
