Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have two site connected and I have this situation:
Site A:
Interface to site B with ip 10.41.105.62
vlan 100 with ip 45.100.0.1
Routes:
ip route 45.100.0.0 255.255.255.0 Vlan100ip route 45.100.10.0 255.255.255.0 10.41.105.198
PC A in vlan 100 ...
Hi all, I have a Cisco switch 3750 with this configuration: on Fast ethernet 0 I have configured this network:
interface FastEthernet0 ip address 10.41.105.198 255.255.255.192
this interface is connected to a remote site (remote site address is 10...
Hi all, I have the following configuration:....interface GigabitEthernet1/0 description ita_internal ip address 10.39.1.1 255.255.255.0 negotiation auto no keepalive no cdp enable....interface GigabitEthernet2/0 description esp_iop ip address 10.39.2...
Yes, as I reported on my post those are the results:
ping from SWITCH 3750 to remote site 10.41.105.1 is OK
ping from PC to 45.100.11.1 (GW) is OK
ping from PC to 10.41.105.198 (FastEthernet0) is OK
ping from PC to remote site 10.41.105.1 is NOT OK ...
