Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So we have two sites and we are trying to encrypt our MAN connection between the sites. We have 3750's with the C3KX-SM-10G module that allows for MACsec. The only issue is the switches within the carriers network.Has anyone tried this before or know...
Will the c3750e-universalk9-mz.150-2.SE6.bin IOS on a Cisco Catalyst 3750X-48PF-E Switch andthe c3750-ipservicesk9-mz.150-2.SE6.bin IOS on a Cisco Catalyst 3750G-48PS Switch be able work in stacked mode?For the 3750G switch there is no universal imag...
Hello,So I have a Cisco 1310 Access Point that is in Rommon mode. I have the image on the Access point but I did not use the archive download command to extract it. When I use the tar -xtract flash://c1310-k9w7-tar[1].124-25d.JA2.tar flash: command I...
Was this issue resolved? We just added a 3750X to a switch stack and are on 15.0.2(SE6) and experiencing the issues with the logs showingJul 20 03:34:08.686: %ADJ-3-RESOLVE_REQ: Adj resolve request: Failed to resolve x.x.x.x Vlan251Jul 20 03:34:16.17...
It has an ipservice's license on it . See below.show licenseIndex 1 Feature: ipservices Period left: Life time License Type: Permanent License State: Active, In Use License Priority: Medium License Count: Non-Counte...
I figured it out. Since in ROMMON mode I couldnt delete the IOS or anything else in fact I used the format flash: command and then followed the directions to TFTP a new image to the AP. Found here https://supportforums.cisco.com/document/31571/cisco-...
