Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm hoping someone could guide me on this. I've got a 1832i in my home office running 8.10.130.0 in Mobility Express and I can get clients connecting to it fine. What I'm finding is I'm getting some weird intermittent connectivity from my clients ...
Hi All,
I have a basic setup as follows:
Device A -------- 6500 VSS ---------- 3750 Stack --------- Device B
For some reason the two devices use Multicast to send their configuration despite being the only two in the group and needing to be on the...
Ok, so after a lot of trial and error, I think I may have gotten to the bottom of the issue. This issue seems to have been twofold.1. Despite my home office being 50+ meters away from where the router is providing the other WiFi Access point, it woul...
Hi Leo,No, it's just me, as I mentioned previously this is my home office so it's just me on my laptop. It would appear to be something to do with inbound traffic only from the Wireless clients to the AP, on both devices I'm testing on, I'm getting n...
Hi All,Unfortunately, the upgrade appears to not have resolved this issue. Whilst connected on my laptop it switches from wired to wireless constantly due to the identical routing metrics I've got applied. When it switches to wireless I lose my audio...
Hi Leo,Sure, the client remains connected throughout the tests and running ICMP tests to the controller works fine however, moving beyond that to any other device either on the switch or the gateway I get no response. If I then try ICMP from another ...
No, it doesn’t unfortunately. The issue remains regardless of when the AP is rebooted.I'll try and get a hold of the new software. Unfortunately, I'm unsure if I'll be able to since my work moved away from Cisco to another provider a few months ago. ...
