Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All, Can you give opinion how secure is it connect WLC based Wireless LAN to existing LAN and wireless traffic will go through firewall in order to reach server farm, however, it will only go through ACL for Wireless to Wired LAN access. Please ...
Dear allI have upgraded 3560 to the latest. Before upgradation, enforcement of ipbase is showing as yes, however, after upgradation, it is showing as no. moreover, in show version output, license level & type are ipbase and permanent respectively. ...
Dear AllPlease check the output, it shows around 52 MB of total memory whereas show version shows 128 MB. Can someone explain the different. Switch#sh mem Head Total(b) Used(b) Free(b) Lowest(b) Lar...
Dear AllMy 6513 max cpu utilization reaches around 60 % however, avg CPU remains around 10%. What is the ideal maximum cpu and memory utilization percentage? Can someone explain. 6111114444411111444441111122222444443333344444 3333311100 90 80...
Dear all, Can someone confirm if WS-C3750X-48PF-S support poe on all 48 ports. We have IP phones connected to existing 3560s and we want to replace them. On cisco site it is written that it is Stackable 48 10/100/1000 Ethernet PoE+ ports, with 1100W...
hi thnx for ur response, cam u plz elaborate further , from the above output , free memory is only 19 mb, however, show version shows 131072K bytes of memory. this switch is not in production, is 19 mb free memory normal ?
Dear allI need to apply 15 ACLs on SVIs, each ACL is having around 30 lines, based on the cpu utilization of 6500 mentioned (max 60 %) is it recommended ?
Dear eduardoaliaga Thanks for your reply, but dont u think that if a dos attack happens during peak time or legitimate traffic increases suddently then having 60% max could be very risky. Thanks
