Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, What command can we use to check the type of SFP inserted in a switch or Router? I needed to check if the blade in my 4500 switch is populated with any SFPs? Will the command be applicable for other series of Catalyst switches as well?Appreci...
Hi all, Can you please let me know if it is feasible (from a Networking perspective) to have Cisco and 3Com switches together in a LAN environment. I have a Distribution layer for one of our offices, and we have a mixture Cisco Catalyst 2960 and ...
Hi, Can you please let me know if the WS-C2960G-48TC-L switches support stacking? If yes, can they be stacked with the current WS-C2960-48TC-L switches I have in my network?I have checked the Cisco site, and it says all 2960S series support stacking....
Hi, We are rolling out a new application on our Client network, and are currently planning to upgrade the BW on the WAN links from all the spoke sites. All sites connect to the Datacenter (where the app server would be placed) through MPLS links.The ...
Thanks for your inputs guys. "Sh inv" does not show me the type of SFP installed? If it's a GLC-SX-MM or a GLC-LH-SM etc.. Also, the "sh hw-module subslot 9/0 transceiver 0 idprom" command is not supported in my switch.Is there any other command that...
Hi Elyinn, Thanks for your reply. There is no EF46 type of traffic here. The Application in question would be TCP based, and we would be using AF31 services probably, and are currently talking with the SP on the same.CheersNavneet
Hi Elyinn, Thanks for your inputs. The graphs I have attached are from a sample site for reference. But I agree with you that QoS would be a better option on links that are not saturated.As you said, 70% utilization should be a reference point. Does ...
Hi All,To further add to my query above, Iam attaching 3 BW util reports for reference. These have been taken with a time interval of 1, 5 and 15 min average. While recommending upgrade, we should always be looking at the peak point in the graph as r...
