Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I currently testing setting up Vlans. here is my setup PC on Vlan 10 ip=10.10.11.200 sn=255.255.254.0 DG=10.10.11.210PC VLan 100 PC ip=192.168.1.100 sn=255.255.255.0 DG=192.168.1.1 From the PC on Vlan 10 i can ping the DG, Vlan 10 IP and PC on VLan...
I am a little new to the FTD devices and have seen since 6.2.2 there is still no support to multi-factor authentication, or locking down who can access the VPN by a group in active directory. is there a time frame of when this will be available?
I am trying to sync up a back up device with another company for offsite backups. I'm working with an ASA 5505 and having trouble allowing access to an internal host on ports 22,80,443. My current setup has multiple IPs coming in on the outside inte...
We are having some troubles with files opening very slow and outlook being extremely delayed so i started to look into our network ran a sh proc cpu his and here are the result are below. we have 2 VLans and no ACLs. I am seeing the Hulc LED Process ...
I just inherited this environment and came across a problem. We have Vlan20 set up 192.168.20.x for guest wireless and this should not be able to access our private network Vlan10 100.x.x.x. We have cisco 3750x switches and i do not see ip routing se...
sorry for the confusion. I would like my vendor to come in on 1.1.1.40 and the traffic to be sent out on 1.1.1.40. The way i had it set up the vendor was able to come in on 1.1.1.40 but he saw the traffic coming from 1.1.134. So basically my vendor w...
On Tuesday we had a power outage for an extended period of time and i took the entire network off line. I will keep an eye on it but so far here is the cpu his and the show log is still filled with up/downs 223333322222333332222244444222222222222...
I was just looking at the inventory and all switches are are WS-C3750X-48 but SW1 in the stack, the stack master, is Version 2 all the rest are version 1. Could this cause any issues?
The stack up time is 12 weeks, 4 days, 22 hours, 19 minutes. I just noticed that the date/time was incorrect on the switch but this is what i am seeing when running show logging 070435: *May 28 17:44:01: %LINEPROTO-5-UPDOWN: Line protocol on Interfa...
