About cobbcobb

cobbcobb · 05-10-2014

I know this question has been asked a few times before, and I've looked through all of those discussions on the board. None of those have been answered successfully, and I hope that maybe I can describe the problem in a way that will help someone her...

cobbcobb · 05-20-2014

I also find it interesting that Cisco is a member of AVnu, who works to promote the adoption of AVB. We have a major project coming up in 2015/2016 and the integrators want to use Extreme Networks. I highly prefer Cisco due to the massive amount of t...

cobbcobb · 05-14-2014

Thanks again for your help. I finished the configurations this morning with point to point links between the 3750 and the 2960 switches. I'm running the vlans only from the distribution layer down and I'm able to login remotely to any switch from any...

cobbcobb · 05-12-2014

Ok...I understand. Specifically the 2960s can do static ip routing:http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swipstatrout.html#wp1202471 I see how it's possible now to do a...

cobbcobb · 05-12-2014

ok...I think I'm following you.So do (config-if)#no switchport for each interface that's coming in from the 2960s and give it an ip address?Would I need to run a physical line for each vlan on the 2960 up to the 3750? Otherwise, how could the 3750 s...

cobbcobb · 05-12-2014

I may not be using the terms Core, Distribution, and Access correctly. I'm working on my CCNA right now, so I'm new to this!I attached a diagram. Basically we have two legs of the network that are self contained and the only data that needs to get in...

Member Since	‎05-10-2014 11:29 AM
Date Last Visited	‎11-16-2018 02:53 PM
Posts	7

User Statistics

User Activity

SG300 series duplicate IP on VLAN

I also find it interesting

Thanks again for your help. I

Ok...I understand.

ok...I think I'm following

I may not be using the terms