Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi
Does anybody else have problems setting up the new chrome cast on a ssid with a simple PSK. The chrome cast can se the ssid, but when connecting to it just says "cannot connect" The chrome cast gen 1 works great. The problem is on both 2,4 ghz a...
Hello I have two virtual controllers. The first one I backed up the config to a tftp-server and then restored the config on the new controller. The problem is that the ap:s cant join the new controller that has the same config as the old controller. ...
Hi Is it possible to deploy the Cisco vWLC inside microsoft hyper v? Tried to import the .ova file but hyper-v only supports .vhd. This links states that hyper-v is supported, but I can't find a guide how to deploy it. I would appreciate if anyone h...
Hi Im running a ASA 5505 with 3 vlan:s Inside:192.168.1.0/24 DMZ 172.16.0.1/25 outside DHCP and vpn 192.168.2.0/24I had a hard time to figure out have to ping between the interfaces, but then I added this: access-list inside_nat0_outbound line 2 ext...
Okey, I'm using a 867 on one side and the other a 2821. The strange thing is that the 3560 get's mac adresses from the the l2tpv3 but on the 2821 side there is no mac dresses coming from the 3560 side. (no arp from the 3560 on the 2821 po 1.50)
int ...
Only the ap manager interface, if I do a clear lwapp private-config and clear capwapp private config the ap successfully joins the WLC. My question is if there is a workaround to get the ap to join the vwlc without this configuration on the ap side?
