Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Should be a simple one this, but damned if I can work it out!I've TFTP'd a config from a PIX and modified it for use with an ASA 5510. On startup I get:WARNING: conflicting statics in startup configuration*** Output from config line 1021, "static...
I'm trying to setup an SSL VPN box within a DMZ using a PIX 515. Basically I've setup the SSL box with a DMZ IP and NAT'd this to an external IP. I've put the following ACLs in:access-list INCOMING permit tcp any object-group SSL_BOX object-group WEB...
Does anyone know of any config examples for an 837 router > VPN3000 with a split tunnel to the internet ? I checked out where the usual config examples are and could find nothing.
I've just upgraded from 2 x 3750 core switches with a 2Gb Etherchannel to a 3 x 3750 core via the stackwise cables. The new stack appears to work fine, and has the backbone running at full speed.My problem is that since this work has been carried out...
Hi,I have 2 x 3750's connected to each other via an etherchannel. I'm planning on installing a 3rd 3750 into the stack, but removing the etherchannel, and connecting the 3 with the stackwise cables.I am presuming this should be fairly straight-forwar...
Jon,tRyping error, did it from memory rather than cut and paste (it's been a heavy wkd !!) - will try what you said. That sounds like it should sort it.Andrew
Thanks Jon, PIX s/w is ver 6.3(4)I was kind of thinking along the lines of what you were saying here. I have a:static (outside,DMZ) 172.17.1.100 194.x.x.x netmask 255.255.255.255but all the internal servers are on 10 addresses. I presume that I need...
The RSPAN session was supposed to allow me to run my LAN Observer to try to see what was going on. It doesn't work, but taking it off previously didn't help either.The Gi1/0/6 I have disabled at the server. It has 2 x network cards. This hasn't made ...
I tried with sh tec page, but the output is so vast that I can't cut and paste the whole amount as it overflows the screen buffer on hypertrm.Is there a way to pipe it to flash and tftp it off or similar ?
