Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Can anyone shed light on this:I have the following topology: http://i.imgur.com/ZTVQuwc.jpgI am monitoring port Gi0/1 which is connected to the WLC. When the wireless client(172.16.30.6) pings the wired client on 172.16.30.99, I see two ping ...
Hi all,Can someone explaining why the following occurs? PC(vWLC) ----access port vlan10----- switch ------trunk----- router (fa0/0.10: 172.16.10.1) vWLC management ip : 172.16.10.5, vlan identifier 10 When I set the vlan id (controller > interfaces ...
Hello all,I am trying to enable the 802.11a and use the 5Ghz band in my house. However, I am having difficulty in doing this. Please see screenshot below. I have select AU (Australia) as my regulatory domain (2nd image). 802.11a band is enabled(3rd i...
Hello all,I am trying to enable the 802.11a and use the 5Ghz band in my house. However, I am having difficulty in doing this. Please see screenshot below. I have select AU (Australia) as my regulatory domain (2nd image). 802.11a band is enabled(3rd i...
Hi Leo,cisco AIR-LAP1252AG-A-K9 (PowerPC 8349) processor (revision C0) with 49142K/16384K bytes of memory.Processor board ID FTX14449019PowerPC 8349 CPU at 533Mhz, revision number 0x0031Last reset from reloadLWAPP image version 7.0.250.01 Gigabit E...
