About jlmiller78M

jlmiller78M · 07-05-2014

Hello everyone.I have 8945 phones configured using SIP, and when attempting to access the Phone administrative menu, it prompts for a password. Unfortunately, I have no idea what the admin password is. 'cisco' doesn't work. Neither does 'secret'.R...

jlmiller78M · 06-04-2014

To all the experts out there, I am volunteering with a IPT (Voice) install for my Church. They have a 2911ISR router, which I am trying to setup / configure for a small office configuration.The question is as stated: Do I need to (re-)install CUE t...

Hi Nadeem,Thanks for the · 07-06-2014

Hi Nadeem,Thanks for the response. No, the phone was never used on CUCM. Unless someone has another idea, I guess I will need to reset to factory default.Regards,Jim

jlmiller78M · 06-07-2014

Hi Kevin. Thank you for your help and patience. You know what they say about another pair of eyes, or having someone else to talk to.I have been able to successfully reach CUE on the 150 Vlan (10.0.150.2) after removing the 'shutdown' (no shut) and...

jlmiller78M · 06-06-2014

Hi Kevin. I do have that in place.maccrouter1#sh ip routeCodes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF N...

jlmiller78M · 06-06-2014

Hi Kevin. Yes, I gave the ISM an IP; 10.0.150.2. The Voice Vlan is planned to be 150. Yes, I can ping the IP from the router (10.0.150.1). Here are the 'show run interface' commands I have.maccrouter1#sh run in ism0/0Building configuration...Curr...

Member Since	‎06-04-2014 02:40 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

How is Common Phone Profile configured in CME (or CLI)?

2911 ISM and CUE: Do I need to (re-)install CUE for GUI access?

Hi Nadeem,Thanks for the

Hi Kevin. Thank you for your

Hi Kevin. I do have that in

Hi Kevin. Yes, I gave the