About andf1

andf1 · 08-16-2006

Hello all, We are seeing high CPU utilization on one of our Cisco 6500 layer 3 switches. The logs don't point to any issues. The traffic on the switch is not significant. SHO PROC CPU shows that L3Aging is responsible for 93% of the CPU load. I am op...

andf1 · 08-16-2006

Sorry I am posting this into LAN Switching as I should have in the beginning.Hello all,We are seeing high CPU utilization on one of our Cisco 6500 layer 3 switches. The logs don't point to any issues. The traffic on the switch is not significant. SHO...

andf1 · 07-11-2006

We have several WAN links and we monitor them through Netflow Tracker from Crannog Software. See http://www.crannog-software.com/index.php?go=Product.ShowDetail&ProductID=1. In addition to bandwidth usage information, you are also able to drill down ...

andf1 · 10-25-2005

Hello,Here is a link for the Websense deployment guide: http://www.websense.com/docs/support/documentation/setup/v61/WebsenseDeploymentGuide.pdfAndy

andf1 · 10-24-2005

Have you configured Network Address Translation (NAT)? The private addresses you are using through DHCP will need to be translated into public addresses using NAT. I am fairly sure that the SDM lets you configure NAT. If not, you can always configure...

andf1 · 10-24-2005

What proxy server software are you using?Andy

andf1 · 10-21-2005

Can you not telnet to the router and add a secondary address to the inside interface? For example:interface FastEthernet0/0 ip address 2.2.2.2 255.255.255.0 secondary ip address 1.1.1.1 255.255.255.0DHCP does work on secondary interfaces I think.I do...

Member Since	‎07-31-2003 05:32 AM
Date Last Visited	‎02-13-2019 07:15 AM
Posts	8

User Statistics

User Activity

High CPU utilization on 6500. L3Aging shows 94 % utilization.

High CPU utilization on 6500. L3Aging shows 94 % utilization.

Re: Monitor T3 bandwidth

Re: Web Filtering Software

Re: 837 and DHCP

Re: Web Filtering Software

Re: 837 and DHCP