Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello allGetting a MARS tuned, building reports,user rules, etc....takes a significant amount of time and effort.So I was wondering, is there anyway to back up the MARS configuration?And NO...I am NOT referring to the data from devices. We already ha...
hello allI have some confusion about these two different commands."switchport trunk allowed" is the command I thought was used to restrict (i.e. prune) a vlan from a trunk.Recently I encountered a config where "switchport trunk pruning" was used. Cis...
Hello allAm hoping to get some info and advice to sort out a possible multihoming implementation.Scenario: Have separate 3725 with 256MB of memory,each connected to different ISPs. An E-commerce site, we're more concerned with high-availability rathe...
Has anyone had success in getting a PPTP VPN user to authenticate against either win2k or win2003 IAS ?I spent hours today doing just that. IPSEC/VPN client/XAUTH authentication easily worked on both OS versions, but no matter how I adjusted configur...
thanks for the replies, as it turned out...I spent part of this Saturday afternoon doing some empirical testing with a 3550 and 2950.I trunked them together with a vlan 1,2,and 3.I used the "switchport trunk allowed vlan except 3" and sure enough, tw...
I solved the issue in question. After someone in a post above mentioned that they had fit both 7.21 and ASDM 5.2 into a PIX 515E I went back to the PIX in question a did a "fsck" command. Its output showed some hidden directories (something that did ...
I'm in the same boat. And I think the responder to the original post missed the point. Apparently, there is not enought room in the 16MB flash to load BOTH the PIX 721 OS binary and the ASDM 721. My PIX515E has 16MB of flash. Pix721.bin takes up 8,20...
Thanks for your input. Yes I would run BGP on the 3725s, though I think there's little need to accept anything other than a default route from upstream. I figure I could use AS path prepending to my outgoing announcements and thus adjust incoming tra...
