Hi,CiscoWorks LMS 4.0 timezone is VET. I know that LMS time is syncronized with system time. Hovewer, system time is correct but LMS's time is wrong.-I restarted LMS CW Deamon Manager-I re-installed LMSMy problem still exists.What should I do to sync...
Hi, When I started the Ciscoworks LMS 4.0 installation, an error box appears and says that "TAGS,PATCH_TAGS... not found in TOC" what is the wrong? Could you help me please? Thank you for your help.
Hello,If you have different Public IP subnets on ISP Routers that are managed by ISP and you would like to access from inside to outside, you can implement 2 default route with same metric for both of ISPs, it can load balance the traffic. However, t...
Hello,If you cannot change the default gateway IP on computer, change it on the router's Fa0/0 interface. Your computer's default gateway address must match with the router's Fa0/0 interface. Change your router's Fa0/0 interface IPs to match your com...
Hello,Seems that your OSPF configuration is working properly.From HQ Perspective;1) What is you computer's IP/MASK/Default Gateway? IP address must be in range 172.16.10.2-14, Mask 255.255.255.240, DGW: 172.16.10.12) Can computer ping its own IP?3) C...
Hello,If your router doesn't receive hello packets from its peer, hold time will expire and your neighborship will be terminated. Because EIGRP Hold Timer works a little bit different. If your routers have 5 Sec Hello, 15 Sec Hold Time configured, th...