Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We currently have a cluster of two stackwise 9500s with two links to 10G, we need to upgrade the links to 100G. What do you think is the preferred procedure? You can run the "no stackwise-virtual link 1" command on 10G links and then run the "stackwi...
Hello, about using Dynamic Groups (Settings -> Device Groups...) I tried to create a rule about “Rule Match Type” using "attribute" that are contained in the configuration of the Device that are collected during the discovery process.The list of attr...
Hi,
I have an ise system ver 1.3 where are configured more than 400 guest users and I need to export all users to a new environment ise ver 2.3Is there a smart way to do it?I would not have to recreate all users by hand.Thank you
Hi,they are a old environment on wlc 4400 that need to migrate on new environment to 5760, in addition to the controller 4400 are hooked different models of access-point including some of these are not managed by the new controller 5760.It is possibl...
We wanted to verify if the described procedure was the most suitable and fastest one since we only have 45 minutes of time in the maintenance window.Since the cluster is already in production, we wanted to avoid disabling the stackwise on the 10G lin...
Hi,I have verified and it seems to me that in the compatibility matrix of the ISSU way there is no upgrade directly from 15.2 to 15.5 so you have to proceed with the traditional way. Best Regards
