Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello.
Here is interface config:
interface TenGigabitEthernet0/1/0.199 encapsulation dot1Q 199 ip address 100.65.0.1 255.255.0.0 ip nat inside ipv6 address ISP 0:0:0:199::/64 eui-64 ipv6 enable service-policy type control Captive ip subscriber l2-con...
Hello. I have IPoE customers, with IPoE sessions configured like this:
policy-map type control IPoE
class type control CM_C_IPoE_RTIMEOUT_REAUTH event timed-policy-expiry 1 service disconnect
!
class type control CM_C_IPoE_REJECT_REAUTH event tim...
Hi.
Got the problem with SCE 8000
It reboots every 7 hours approx.
Any ideas?
Here is what i've found in dbglog.txt:
12/19/15 09:11:42 [000000023137:280:676] | 000 | 0000054504 | 0000000 | <<ERROR>> [0x0a10:0x0002] System Message: Standard output/e...
Hello. Just starting with ISG.
My final goal is to force ISG device to periodically check if user still has access to the service without interrupting pppoe session. if user access should be prohibited by some reason, he should be redirected to bil...
(config)#vpdn logging ? accounting Send VPDN log to AAA accounting cause Cause of termination local Log VPDN events locally remote Log VPDN events to a remote tunnel endpoint tunnel-drop Log VPDN tunnel drops user Log VPDN user events <cr>
Why, oh why, RAID degradation is not shown in SNMP table cucsStorageLocalLunTable ?And there is also no cucsEquipmentIndicatorLedTable on UCS 220M3S, CIMC v 2.0(1b).I have to reinvent a wheel, to monitor this thing in zabbix.
