Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
We are planning to upgrade two of our old 3845 routers running DLSW to 15.1.4M12a, the current MD release. Here are the existing codes.
DLSWR-01#sh ver | i IOSCisco IOS Software, 3800 Software (C3845-ADVENTERPRISEK9-M), Version 12.4(16b),...
Hi All,
Based on your experience, what is the primary method to avoid CEF Polarization? Which of the following algorithms do you deploy as best practice?
a.) Src IP and DstIP + L4 ports
b.) Configuring a unique UID (Universal ID) per layer
Whic...
Hi All,
If I only have 4 ports active on this line card, say ports 2, 10, 9 and 17, which are all first ports in each group. Will those be able to forward traffic at line rate 10Gig without the rate-mode dedicated force command? Based on the docume...
Hi All,
http://www.cisco.com/c/en/us/support/docs/interfaces-modules/nexus-7000-m1-series-32-port-10gb-ethernet-module/116262-problemsolution-product-00.html
The above document for a N7K-M132XP-12 line card states, configuring rate-mode dedicated f...
Hi All,
http://www.cisco.com/c/en/us/products/collateral/routers/4000-series-integrated-services-routers-isr/datasheet-c78-732542.html#_ftn7
Table 5 on the link above states that a SEC license is needed to run DMVPN. However, it also states that an...
Got it, thanks. It states 512/128 on the download page for 15.1.4M12a. I'm assuming this is 512Kb?
Here is the current RAM usage.
DLSWR-01#sh ver | i memorCisco 3845 (revision 1.0) with 221184K/40960K bytes of memory.
I believe this states I ...
Sorry, I cut the output for 8/26 since I only focused on the speed. They look the same to me.
N7K3# sh int e8/26 capaEthernet8/26 Model: N7K-M132XP-12 Type (SFP capable): 10Gbase-SR Speed: 10000 Duplex: full Trunk encap. type: 802.1Q FabricPath capa...
