Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, i must configure a ISR 1112-8P vpn site - site connection to a ASA 5555-X. I need IKEv2, crypto map und VRFs. The config you can see below. My problem, the vpn didn´t come up. But, the same configuration with a isr 800 works fine. Everything i...
Hallo,
i have confugure a 1852i with Mobility Express and a SSID with WPA2 Enterprise.
Everything works fine with Windows but with MAC Book after 30 minutes the Gateway is Not reachable. The client is still connectet to the AP. The WLC is run with ...
Hello,
i have installed a 5520 as the local controller und a 2504 as the anchor controller. Both coltroller have the code 8.2.151.
Every thing goes up and it look fine, but the clients have a slow connection.
Here are my questions:
1. Is the combi...
Hello, does work the Cisco 702W Access Point with OEAP mode and remote LAN feature? In the future i must install this by the custumer. Thank you for your help. Andre
Hi, i checked the old configuration from the 896 ISR again. The only diffrent is, that ip cef is disabled. Is this maybe the problem? I have never configuard ip cef befor. A colleage means, he had the problem ones befor.But, i can´t disable ip cef on...
Yes i ping the server in the remote location withe the source interace loopback 0 ping vrf vrf-lan 10.x.x.x source loopback 0 Also i have configured a ip sla. I can see it with wireshark.
