Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear All,I can able to connect the SSL VPN through Cisco Anyconnect Mobility Client and Secure Routes (10.10.50.x and 192.168.1.x) i can able to access 10.10.50.x .. however i am unable to access the second 192.168.1.x network.... i am able to ping a...
Dear All,I can able to connect the SSL VPN through Cisco Anyconnect Mobility Client and Secure Routes (10.10.50.x and 192.168.1.x) i can able to access 10.10.50.x .. however i am unable to access the second 192.168.1.x network.... i am able to ping a...
Hi Everyone.... I need urgent help on the below scenario....ISP Managed Router connected to ADSL & looked for me to view or change configuration.... i have successfully configured my own 2921 to work with ISP router with IP NAT, Internet is working f...
ISP Provided a Managed Services Router 800 Series configured with Static Public IP and two IP DHCP Pool for our Fixed & Wireless LAN (10.10.10.0/32 - LAN & 10.10.11.0/32 - Wi-fi).I have Cisco 2921/k9 to put behind this Managed Services Router 800 Ser...
Hi,I have strange issue, ports allowed from PIX525 for 995, 993 and 587, however workstation still having issues to access pop3.Network Design:Workstations >>>>>>>>>> Cisco C3750 L3 >>>>>>>>>> PIX525 L3 switch: VLAN1 using route map policy and pop, s...
Hi Paul,I have changed the config as required.... yes ISP router side is 10.10.10.1Still issues.... Internet is working fine for my LAN users...When i connect VPN on ISP managed router - 78.93.181.41 its connected....I can ping 10.10.10.0 range.... a...
hi guys,I little help required as i am already through with this issue...i have successfully configured my own 2921 to work with ISP router with IP NAT, Internet is working for all my LAN Users. CONFIGURATION OF 2921 Attached.After connecting the VPN...
Leo the download is 20 Mbps and 1 Mbps upload... the problem needs to be fixed here is to configure the 2921 as gateway to my LAN... as ISP blocked the configuration and i can only obtain ip dynamically from 800 as 10.10.10.0/32 subnet.
ISP Managed Services Router is Cisco 887 VA (ADSL) and WAN speed is 20 Mbps.We cannot remove this Managed Services Router, however 2921 is newly purchased with CME and we like to configure this 2921 as DHCP for LAN Users and Internet services.
