Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hello together, i have a server where i cant change snmp deamon port and which is not 161. and i have a monitor system where i cant change snmp to ask at another port then 161. in between there is an asa so i thought maybe its a good idea to just rew...
hello together,i have a router with 4g connection, but i dont get an ip address assigned to my ce0 interface.chat script is working, ce0 interface get up/up but no address is assigned, i can even see that dns information is pushed from the provider t...
hello,
i have a C881G+7-K9 router in tunesia with 3g card. i have tested the sim in my mobile phone and internet access is working but i dont get it running in the router.
when i do a ping 8.8.8.8 the ce0 interface should be getting an ip adress but ...
hello,
i have a question about how to not distribute a nat range when real interface is down.
interface Loopback0 ip address 10.0.0.3 255.255.255.0 ip ospf network point-to-point
interface Vlan1 ip address 192.168.5.3 255.255.255.0 ip nat insidein...
hello together,
i have a dmvpn configuration with dual hub and ospf.
i had one spoke and now added another spoke. but i dont want both spokes to open a tunnel with each other, i want all traffic going through the hub.
with "tunnel mode gre ip" on a ...
hi,heres the output: asa/pri/act(config)# show nat interface monitor-lan detailManual NAT Policies (Section 1)38 (monitor-lan) to (server) source static monitoring monitoring destination static server server service snmp-server snmptranslate_hits = 0...
System image file is "flash:c800-universalk9-mz.SPA.157-3.M.bin"Current configuration : 7775 bytes!! Last configuration change at 13:24:57 MEST Thu Oct 24 2019 by rob!version 15.7service timestamps debug datetime msecservice timestamps log datetime m...
