I have a  WS-C3650-48TS running on IOS ver 16.6.7. I have seen log entries like following for the interfaces where no device is connected.I have seen similar logs entries for interface Gi1/013 & Gi1/0/14. There are no other log entries other than the...

Hi All,   We have C3650 which is connected to our ISP and default route is statically routed to ISP. Another interface is connected to the customer and 2 subnets are statically routed. We are going to connect to the second customer who wants to use B...

We have 2 Cisco 1921, as R1 and R2 connected to 2 Cisco2960G SW1 and SW2 Cisco 2960G are connected to each other using a Trunk interface. Main point to point link is connected to SW1 and redundant hand off of same point to point link is connected to ...

Our provider is going to hand off Ethernet circuit using EX-SFP-1FE-LX. Is it supported on Cisco 3650?

We are planning to replace our Cisco7206-VXR-NPEG2 with cisco3650. I would like to know if it is good idea. 7206 is being used only for layer3 routing and one access list with couple hundred entries. One interface of router is connected to ISP and an...