Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,i have a problem with my ASA configured VPN wan, i have 6 cities and one city is disconnect and give the error:Unknown IKEv2 Negotiation aborted due to ERROR: Failed to allocate PSH from platformthanks for your help,
Hi All, I hope someone can help me,i have one ASA5520 with 512m the RAM, i liki put 2G but when I change the RAM at 2G,the ASA give the mesage booting waiting. I waited 30minutes and nothing happens. May 512m works very well, someone has had a sim...
Hello everybody,I have a problem with some access point: AIR-LAP1252A6-A-K9 version: 12.4I don’t have write de command:AP#debug lwapp console cliAP # lwapp ap ip address 192.168.1.100 255.255.255...
Yes, I put in programming IKEv2 debug, to see the conection setting the upper firewall, it must have the same parameter
crypto ikev2 proposal PHASE1-prop
encryption 3des aes-cbc-128
integrity sha1
ensures you to have parameter 128,
Hi Marius,it is with memory card Cisco, last version 8.2.25 now is upgrading at 9.1.6 R6,with 512m it's good work but with 2g it's bad, Thank you for your help!
Thank you for your answer, but I have problem, the controller is finished it is dow, What I do in this case because the controller is dead!There is a way other solution without controller?Thinks for your hep.
