Friends,I have a 2951 router and 2 service providers, with no firewalls and we dont want to get firewalls, now we need to make a failover configuration for those two service providers, any suggestions please. ThanksVikram
Hello,We got a situation here in our company, we have an international site and that has an x service provider and they are facing problems with that ISP and now they signed another contract with the same ISP for another 5 years and now we have to co...
Amit,we are using OSPF routing protocol on it. I configured my lab router with IP SLA as follows track 1 ip sla 1 reachabilitytrack 2 ip sla 2 reachabilityip sla 1 icmp-echo <ISP1 Ip address> source-interface GigabitEthernet0/0 threshold 3 timeout 10...
Hey Jody, I configured my lab router with IP SLA as follows track 1 ip sla 1 reachabilitytrack 2 ip sla 2 reachabilityip sla 1 icmp-echo <ISP1 Ip address> source-interface GigabitEthernet0/0 threshold 3 timeout 1000 frequency 180ip sla schedule 2 lif...
Second ISP also will do the same thing.there will be no static routing on second isp.. we have our scenario in the following way: Router ------2Modems-------------ISP Provider------------WAN Routeri am sorry for such a bad explanation,the 2 modems a...
