Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi guys,
I need some clarification on how the dual-feed DC power supplies are suppose to operate on the IE series switches.
We have an IE4000 with 2 DC power feeds, DC-A is 54VDC and DC-B is 24VDC.
When DC-A is lost and the switch is running on DC-...
Hi guys,
I've got Prime Infrastructure 3.0.2 installed and I'm trying to get Plug and Play (PnP) working with CNS on PI.
- The switches we tend to deploy are 2960X, 3560-C/CX and I have got our Windows DHCP server configured with Option 150 to point...
Hi, I'm looking for a HA solution for 2 wireless POE AP's on a tower (unreachable). Basically 1 AP will be powered on and transmitting, and I need to have the other AP powered off (POE off on switchport) but if the 1st AP drops (not pinging or interf...
Hi Pedro,
Thanks for the update! I managed to get my switch to actually boot to the AUTOINSTALL command too... but my switch actually trys to use OPTION 66 (BootServerHostName) instead...
I need option 66 in my DHCP scope for use with our Microso...
Perfect! never even knew about EEM. That's the solution - EEM and IP SLA together.- IP SLA to monitor the 1st AP interface and EEM to trigger commands to power on 2nd AP. Thanks mate.
Happy to purchase the required switch to do the job if possible. Theft is not a problem - AP is 50m off the ground on a tower. The AP's are acting in a WDS network and which these two AP's will participate. The HA part of the design needs this 2nd AP...
