Hi Everyone, I have an existing 3750-X switch running in the network. I'm planning to add one 3750-X then stack it with my existing. I know I don't need to add any configuration when stacking with stackWise cable. But my concerned is in stacking powe...
Hi,
You can refer to below link for FEX supported/unsupported topologies.
https://www.cisco.com/c/en/us/support/docs/switches/nexus-2000-series-fabric-extenders/200363-nexus-2000-fabric-extenders-supported-un.html
Thanks!
Al
Is your gateway for VLAN 90 and VLAN 98 pointed to the Core switch (6500)? If so, you can configure a VACL that only permits to Internet 10.1.1.0/x and denies any other VLAN.
#ip access-list extended INTERNET
permit ip 10.1.1.0 <wildcard mask> any
#...
I will set my existing to priority 15 to make it as master. How about my power stack? What is the right way to connect these cable using only slot 2 PSU for both switch.
