Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,we were able to succesfully configure a Route based tunnel between a Meraki MX and a Fortigate. BGP is working as expected the only drawback is that we cannot apply any prefix filter at the MX-side (at least we were unable to find any option r...
Hi,A few quick questions : I noticed that non-meraki VPNs now support BGP routing. In any other case (ASA, routers, etc) I would associate this with Virtual Tunnel Interfaces.- So is Meraki supporting VTI-based VPNs without calling them VTIs?- What d...
Hello all,We have a datacenter which is built with VMWare software and for networking we use NSX-T (we migrated from NSX-V this year). VPN-tunnels with NSX-V were not really super table but since the migration VPN-issues are almost a daily occurence....
Hi,when I was playing with the new AP Neighbor option I saw that AutoRF makes strange choices when it comes to channel planning:We're mostly using 40Mhz channels on 5Ghz and what I see is:- Some channels have the lower channel as primary channel, oth...
Hello,we have a few customers who require users to use a VPN client to access to other local VLANs also when they are at the office or workplace (so not at a remote site). Normally these users only have access to a few local resources and the Interne...
In this case it's a test setup and we control both sides but if we want to connect to 3rd parties this just looks bad. Will follow your advice and use the feedback button.
Please bring back the green color. I cannot distinguish my Meraki tabs anymore. This is a real step back in end user experience. The Green color was really nice and recognizable, the new color scheme is way too boring business-like (80s IBM called, i...
