Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are installing a new NETAPP appliance that will be used for iSCSI and connected into some 9372 Nexus switches.
The contractor says that the NETAPP will not be connected by a VPC but by two seperate links connecting to the two 9372 switches that ...
We have a new pair of Nexus 9372 switches and was wondering the best way to connect them to a pair of 6800 in a VSS configuration
We have a pair of 5596 connect to another pair of 6509 in another data centre so I am more familar with those.
For t...
We currently have 3850 switches in our access core. These connect to a 6509 VSS core by some port channels. Also connected to the VSS core is a pair of 5596 Nexus switches with a 40 GIG port channel to some 10 GIG 6708 cards in the VSS using etherch...
I am under the understanding that if you enable jumbo frames in a VLAN then all ports in that VLAN should have jumbo frames enabled. We have a server farm VLAN which we have enabled jumbo frames on. All the ports in that VLAN on the 6500 are set for ...
When you define a QOS policy on the Nexus and you have a priority queue do you have to allocate bandwith for this queue. According to this QOS policy that was presented at Cisco Live it didn't reserve any bandwidth. N5k(config)# policy-map type queui...
Thanks for the responses. When I mention this to the server guy he says because of Path discovery this is not an issue. Both clients will negotiate a MTU. In this case it will go down to 1500 Bytes and will not cause any problems.Any thoughts?
