Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can someone help me out with this scenario we have? Have an ASA 5505 (proxy arp enabled) but for some reason the only public ip that is reachable is the outside interface IP itself. Other publics that are translated to internal hosts are not accessi...
Can someone describe to me how you would configure a VPN tunnel on a remote peer that connects to an ASA that has route tracking enabled. How would you configure the tunnel when the peer address could be one of two different addresses? Thank you!!Sen...
Could someone provide a recommendation on a lower end Cisco L3 switch that will do policy based routing?Thank you!Sent from Cisco Technical Support iPhone App
Can someone briefly describe the steps needed on an ASA to allow two IPSec VPN clients to talk to each other. They are in the same address pool. I already have both same-security-traffic permit statements for inter and intra interface. Thanks!Sent fr...
Can someone provide me some guidance on how to configure an Asa that will have a default gateway to an edge router that will be doing PBR? We would like Internet surfing to go out one ISP while internally hosted services in the Asa DMZ would go thro...
This is the way it is listed in the Data Sheet:Does this mean that the IP Services image is not an option?WS-C3560-8PC-S• 8 Ethernet 10/100 ports and 1 dual-purpose 10/100/1000 and SFP port• Compact form-factor with no fan• Enterprise-class intellige...
Okay, can someone verify the following configs (I have attached the relevant portions of the ASA 5510 and the Edge 2811 Router doing PBR)ASA CONFIGinterface Ethernet0/0 nameif outside security-level 0 ip address 1.1.1.1 255.255.255.0 !interface Ether...
One other related question. How could I allow traffic from this new wireless DMZ to access resources that are already being served to the Internet such as a web server. Is there a way to allow this hairpin traffic to exit the ASA and come back in? Th...