Dear support: I met one problem is that we have one fiber internet connection with 100MB bandwidth, use sppedtest of http://www.speedtest.net with one PC connect directly it show download and upload speed is almost 100MB, but when connect one Cisco...
We have one Cisco ASA5515 firewall, I configured ftp mode to passive, inspect ftp in service, use anoother public to do NAT with ftp server, and also configued ACL in outside interface, but I failed to access the ftp server from in...
Our structure is internet---Router----ASA-----TMG----FTP server, I try to publish ftp service to public, I did nat in router and created access-list in both router and ASA to allow ftp traffic pass through, and I configured inspect ftp in ASA, b...
We have a cisco 2911 router configured with password for telnet login, but I always failed to login use telnet, does any one know any place need to be modify? thanks!
Sorry, here is configure file:sh runBuilding configuration...Current configuration : 6386 bytes!! Last configuration change at 03:20:32 UTC Fri Jun 21 2013! NVRAM config last updated at 03:20:34 UTC Fri Jun 21 2013! NVRAM config last updated at 03:2...
Sorry, this command still has problem:ciscoasa(config)# nat (LAN,Outside) static interface service tcp 21 21 ^ERROR: % Invalid input detected at '^' marker.