Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone,I'm having an issue with my AnyConnect SSL VPN sessions where the idle timeout is not working. I've set the idle timeout to be 30 minutes, yet I can see clients that have been idle for over 2 days without being disconnected. Below is t...
Hi Everyone,We're having an issue when trying to install the Start Before Login feature on some of our clients and I was hoping someone else had seen the same problem before. The rest of the client package installs ok and even the start before login ...
I put it in the first post, but the ASA version is 9.1(1) or if you prefer asa911-k8.binAnyone else have any ideas? I left it over the weekend to see if the global timeout made a difference, but this morning there was a session idle for over 2 hours ...
Thanks for the idea. Tried setting the default idle timeout to 1800 as suggested but I'm still seeing clients inactive for more than 30 minutseAny further ideas I could try ?
I left that part out of the config snippet above, but I already have SSl keepalives enabled: webvpn anyconnect ssl dtls enable anyconnect mtu 1406 anyconnect ssl keepalive 20 anyconnect ssl rekey time none anyconnect dpd-interval client 30 anyc...
Hopefully this picture demonstrates it a bit better:The inactivity timer is above the threshold of 30 minutes and from my understanding, this timer wouldn't increment if the laptop was still powered on and the VPN client active. As you mentioned, the...
Thanks for the reply. I should of made that a bit clearer in the first post, but when I say idle I mean that the user has normally put their computer in hibernation mode without disconnecting the VPN first. There is no traffic passing between their c...
