Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I have added a new NME-WAE-502-K9 in one of our remote Cisco 2811 routers. This module doesn´t boot, and it seems to be in a loop trying to boot. I´m trying to find documentation about how to proceed with this kind of situations and this kind of n...
HiI´m trying to configure IPsec over GRE tunnel between Cisco 819G remote router and ASR 1002 central router using crypto maps. Currently ASR router has two vrf´s (management vrf and EXTERNOS2 vrf) and in the future we are going to...
Hi.We have a new ASR 1002 router in which UnconfiguredIPv4Fia drops counter is increasing continously. Anybody could help me to troubleshoot the reason of this kind of drops? I have tried to look for tech info about it, but I have found nothing.REMOT...
Hi.This week we have deployed a pair of 7341 in our central office and a two remote offices with NME-WAE-502. All seems to work fine, users notice better application time response, but there is something I can´t understand. Taking a view to bandwidth...
Hi.We are triying to restrict SNMP write community access in WAE devices. We want only some management platforms ip addresses will be able to access to wae devices using SNMP write community but we are unable to do it using GUI or CLI. CLI has "snmp-...
Hi Nicolas. Thanks a lot for your help. As you can see, I was trying from external tftp server, but I have tested from router where NME is inserted too, configured as tftp server, and I obtain the same result.I think I´ll go ahead with hardware repl...
Hi Nicolas, thanks for your response. Your suggested procedure is fine for NME-WAE. However I think our NME-WAE is crashing before to reach BOOT-PHASE3 as described in procedure, so I don´t know if i have to go ahead with sysimg images. Anyway, I hav...
Thanks Nicolas, but this procedure is only for WAE appliances. Now I´m trying to load sysimg from usb pendrive connected to one of router 2800 usb ports, and I´m configuring IOS router as TFTP server for sysimg file, but It doesn´t seems to work fine...
Ops!! I forgot to paste involved routes from both devices.ASR router----------------ip route vrf EXTERNOS2 10.200.24.0 255.255.248.0 10.255.68.245 tag 6ip route vrf EXTERNOS2 185.1.1.0 255.255.255.0 Tunnel21 tag 6 <--- c819G LAN networkCisc...
Hi Peter.Thanks for your answer.I have configured a SNMP read-only community and a second SNMP read-write-community. I´m looking for to allow to everybody SNMP read-only community access, and only two or three ip addresses could access to SNMP read-w...
