We have two L3 3750 switches running HSRP and routing for various Vlans on our corporate network. Rapid PVST is running across our entire WAN.   We are introducing a third party solution for remote communications over MPLS.  When interconnecting this...

I have a ME 3400 that is acting flaky.  I have this device acting as a distribution switch and it is reachable on VLAN 127, which is one of the VLANS trunked to our core network.   When I try to configure one of the fastethernet ports (changing duple...

I have a need to install a POE switch at a remote site where I have access via a T1 circuit.  I don't know if anyone is familiar with the RAD MiRICI T1 SFP, but it essentially converts a T1 to ethernet.  I have a 2621 router on the head end of this T...

We have a network with four 3750's at the core doing HSRP for several VLANS and running OSPF. There are trunk ports from these devices connecting other swithes in various buildings on the campus. All of our servers and some outlying users are on VL...

We have a switched network running OSPF with numerous VLANS all funneling out one default gateway for our internet/outside access.We have had a Comcast cable modem installed to use as a separate internet gateway for Vendors and for out IT departmenta...