Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Guys,Is it possible to deploy a 4440 IPS between the Internet Routers and the ASA 5550 and not after the ASA 5550 as commonly done.WE rae thinking of that because of the throughput of te IPS.If it is possible for the IPS to go between the Inter...
Hello Folks,Below is my configurations for a new IPS we jsut bought .my problem is I can not access it on the network via Cisco IDM launcher.I have connected it via a trunk port to the distribution Switch on the network and trying to from an ip addre...
Hello Guys,I have a 5508 WLC controller at the HQ with the employee ssid ,the dhcp scope on the ssid is 10.120.0.0/16 network.However,I want this same ssid to be brodcasted to a remote site using HREAP access point but with different dhcp scope 10.1...
Hello Folks,I just bought a 5508 wlc and i have been able to configure it with the 1142 AP.This works to the stage ofAP to learn IP address from the controller and associating with it,they are also able to give ip address to the clients from the WLAN...
Hi Guys,I am new to wireless project deployment and would like assistance on this please : I am trying to deploy Wireless Lan Controller 5508 at the head office in Stevenage .The Stevenage Office will have about 8 access points connected to it whi...
Hi Bob,Quick one please -------I will be deploying the IPS behind the firewall answering all the questions you highlighted for me to answer.However,since my initial concern of throughput remains .I want to know if I can create two trunk ports on a la...
The WLC model is Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version.................................. 7.0.98.0Bootloader Version......................
