Hi,
Can any one provide me the alternate CAT OS command for below IOS commands
Switch(config)#ip access-list extended 100Switch(config-ext-nacl)#10 permit tcp host 192.168.1.1 any eq 22Switch(config-ext-nacl)#20 permit tcp host 192.168.2.1 any eq ...
Hi
Is there any range command do to a "clear counter" on switch interfaces.
Switch#clear counters gigabitEthernet 1/1Clear "show interface" counters on this interface [confirm]Switch#
Thanks in advance
What is the Command to check arp table in nexus switch?For example - In catalyst switch if I type below command I will get mac-address of the IPSwitch#sh arp | in 195.168.10.50 How to see the mac-address of particular IP address in nexus switch?
Hi Jon,
We have monitoring tool installed in servers 192.168.1.1 & 192.168.2.1. Just want to know the below commands are correct in Cat OS to send logs to monitoring server from switch
set ip permit 192.168.1.1set ip permit 192.168.2.1set snmp comm...
I see many L3 VLAN's and routing on the switch. This is L3 switch. I just want to know the commands for ACL configurations in CAT OS switch. Could you please help?
Thanks Jon,
This command will be applicable for all ports on switch. Is there any command to clear interface range or the particular module (6500/4500 switches)?
